Fluid Dynamics Test Capability

We have a range of capabilities to test fluid dynamics, such as backpressure and flow induced noise, and transmission and insertion loss.

 

To isolate the device under test from external effects, these measurements are performed in our own semi-anechoic room. We have a wealth of experience in testing individual components such as catalysts and filters, though to the complete systems. We undertake work for major component suppliers and leading OEM’s.
 

Technical specification
Pressure gauges for flow measurement	0-2500 +/- 1 Pa
Pressure gauges for back pressure measurement	0-50000 +/- 5 Pa
Air flow generation (no load)	1 m3/s
Temperature gauge	-20 to +100 +/- 1°C
Measurement of flow induced sound	30-20000 +/- 1 Hz

 

 

Technical specification

Dantec Flowlite 1-D

• 50 m/s and above
• Measuring window: 590mm x 590mm x 690mm (x,y,z)

Accuracy

• Accuracy in velocity depends on the test setup. (Minimum theoretical resolution depends on the laser optics (0.06mm, 0.06mm, 0.48mm)
• Accuracy of the scanner frame is (6.25µm, 6.25µm, 13µm)
• Accuracy of finding measuring plane is <1mm.

 

 

 

Back to Test Facilities